LVM Resize – How to Increase an LVM Partition

Here we show you how to expand an LVM volume or partition in Linux by first resizing logical volume followed by resizing the file system to take advantage of the additional space.

See here if you’re instead trying to do the opposite and shrink an LVM volume.

 

Note: In this example we are working in CentOS 7, some commands may differ in different Linux distributions.

In this example we will work through expanding logical volume /var/centos/var from 5GB to 10GB. We currently have this logical volume mounted to /mnt.

Overview of Logical Volume Manager (LVM)

Before working through the resizing process it’s important you first understand some basic concepts around physical volumes, volume groups, logical volumes, and the file system.

  • Physical Volume (PV): This can be created on a whole physical disk (think /dev/sda) or a Linux partition.
  • Volume Group (VG): This is made up of at least one or more physical volumes.
  • Logical Volume (LV): This is sometimes referred to as the partition, it sits within a volume group and has a file system written to it.
  • File System: A file system such as ext4 will be on the logical volume.

LVM Resize – How to increase or expand the logical volume

This process is extremely easy to do with LVM as it can be done on the fly with no downtime needed, you can perform it on a mounted volume without interruption. In order to increase the size of a logical volume, the volume group that it is in must have free space available.

To view the free space of your volume group, run vgdisplay command as shown below and look at the “Free PE / Size” field.

[root@CentOS7 ~]# vgdisplay
  --- Volume group ---
  VG Name               centos
  System ID
  Format                lvm2
  Metadata Areas        2
  Metadata Sequence No  6
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                3
  Open LV               2
  Max PV                0
  Cur PV                2
  Act PV                2
  VG Size               20.74 GiB
  PE Size               4.00 MiB
  Total PE              5309
  Alloc PE / Size       4030 / 15.74 GiB
  Free  PE / Size       1280 / 5.00 GiB
  VG UUID               VvG6Sp-wIgb-LTh0-szdU-s9R1-a6K9-qHassI

In this example we have 5GB of free space in the volume group, as shown by “Free PE / Size 1279 / 5.00 GiB”.

Note: If you do not have any or enough free space in the volume group, you will first need to expand the volume group to complete the resize. Alternatively if you have multiple LVM partitions, you could shrink a different logical volume first to create space within the volume group.

Now that we have confirmed there is space free within the volume group, confirm the name of the logical volume you want to increase as well as how much space you plan on adding. The below lvdisplay command will show all logical volumes and their current size. It will also show the volume group that the logical volume is a member of, so ensure that the correct volume group has been checked for enough space with vgdisplay as previously mentioned to prevent trying to increase a logical volume that is inside some other volume group.

As shown in the example below, we are going to be working with the logical volume “var” which is in volume group “centos”, the volume group we saw in vgdisplay. In this example we only have just the one volume group, but you may have more so you need to check.

[root@CentOS7 ~]# lvdisplay
  --- Logical volume ---
  LV Path                /dev/centos/var
  LV Name                var
  VG Name                centos
  LV UUID                7PNgg2-ZmnG-a26g-zRoT-PRVM-RDc1-oq6J4M
  LV Write Access        read/write
  LV Creation host, time CentOS7, 2015-04-16 07:50:25 +1000
  LV Status              available
  # open                 0
  LV Size                5.00 GiB
  Current LE             1280
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:2

Now it’s time to expand the logical volume. In the below example we are using the -L flag to increase by a size specified (M for Megabytes, G for Gigabytes, T for Terabytes). You can alternatively remove the + to increase to the amount specified rather than by the amount specified.

lvextend -L+5G /dev/centos/var
  Rounding size to boundary between physical extents: 4.90 GiB
  Size of logical volume centos/var changed from 5.00 GiB (1280 extents) to 10.00 GiB (2560 extents).
  Logical volume var successfully resized

The above command will increase the logical volume /dev/centos/var by 5GB, currently it is already 5GB so this will increase it to a total of 10GB. You could achieve the same with “lvextend -L 10G /dev/centos/var” which will increase the logical volume to 10GB as well, as this is what was specified with no +. Alternatively if you instead want to just use all free space in the volume group rather than specifying a size to increase to, run “lvextend -l +100%FREE /dev/centos/var”.

We can run the below lvdisplay command shown below to check that the extend completed as expected.

[root@CentOS7 ~]# vgdisplay
  --- Logical volume ---
  LV Path                /dev/centos/var
  LV Name                var
  VG Name                centos
  LV UUID                7PNgg2-ZmnG-a26g-zRoT-PRVM-RDc1-oq6J4M
  LV Write Access        read/write
  LV Creation host, time CentOS7, 2015-04-16 07:50:25 +1000
  LV Status              available
  # open                 0
  LV Size                10.00 GiB
  Current LE             2560
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     8192
  Block device           253:2

Now that the logical volume has been extended, we can resize the file system. This will extend the file system so that it takes up the newly created space inside the logical volume. The command may differ depending on the type of file system you are using.

Use this for ext3/4 based file systems

resize2fs /dev/centos/var

Alternatively, use this for xfs based file systems

xfs_growfs /dev/centos/var

After the file system has been resized the space should be ready to use. If you run a ‘df’ command to view the disk space you should see that it’s been increased successfully.

[root@CentOS7 mnt]# df -h
Filesystem               Size  Used Avail Use% Mounted on
/dev/mapper/centos-root  9.8G  1.4G  8.5G  14% /
devtmpfs                 908M     0  908M   0% /dev
tmpfs                    914M     0  914M   0% /dev/shm
tmpfs                    914M  8.6M  905M   1% /run
tmpfs                    914M     0  914M   0% /sys/fs/cgroup
/dev/sda1                497M   96M  402M  20% /boot
/dev/mapper/centos-var    10G   33M   10G   1% /mnt

In this example I have run a ‘mount /dev/centos/var /mnt’ to mount the logical volume to /mnt, as shown above /mnt is correctly reporting a size of 10G.

  • lvm, extend, increase
  • 83 Utilisateurs l'ont trouvée utile
Cette réponse était-elle pertinente?

Articles connexes

S.M.A.R.T (smartctl) commands and test

Installation of Smartcl in Ubuntu $ sudo apt-get install smartmontools Installation of Smartcl...

How to: Replacing a failed drive in a Linux Software RAID1 configuration (mdraid)

Scenario: A drive has failed in your linux RAID1 configuration and you need to replace it....

Check disk details

lsblk -o name,label,size,fstype,mountpoint,modefdisk -l

How to Increase the size of a Linux LVM by expanding the Disk

This post will cover how to increase the disk space for a VMware virtual machine running Linux...

Setup Flexible Disk Storage with Logical Volume Management (LVM) in Linux – PART 1

Logical Volume Management (LVM) makes it easier to manage disk space. If a file system needs more...

Powered by WHMCompleteSolution